كشف الدفاع المدني أبرز الشروط والتعليمات لتخزين المواد الكيميائية، ومتطلبات السلامة الخاصة بمواقع مستودعات التخزين، وشروط اختيار المواقع، والمتطلبات الإنشائية والكهربائية والبيئية. وأكد أن تكون مخازن المواد الكيميائية الخطرة في مبنى مستقل عن المباني الأخرى في مكان لا يسمح بتعرض المخازن لخطر، بعيداً عن الأحياء السكنية والمهمة، والأماكن المأهولة بالسكان، وأن تكون على مسافة آمنة من المنشآت الحيوية وفقاً لمتطلبات الجهات المختصة، وأن يكون المخزن من طابق واحد فقط، ومزوداً بوسائل مقاومة الحريق والإطفاء بمصادر مستقلة، مع تخزين المواد الخطرة في عبوات محكمة جيداً ومعبأة تعبئة أولية جيدة، مدون عليها جميع البيانات الأساسية، وتوافر وسائل كافية للإضاءة والإنارة الطبيعية بمدة لا تقل عن 6 ساعات في اليوم.
وشدد الدفاع المدني على عدم وضع المواد المخزنة في الممرات، على أن يتم التخزين على أرض مستوية خالية من الرطوبة، ومراعاة أن تكون المواد المتوقع تلفها نتيجة اتصالها بالمياه فوق قوائم مرفوعة عن الأرض بمسافة لا تقل عن 10 سم، مع وضع العبوات على أرفف حديدية مناسبة للحجم والنوع، وترك مسافة لا تقل عن 150 سم بين كل رصة، ومسافة لا تقل عن 100 سم بين الجدار والمواد المخزنة، ووضع الاسم الكيميائي على كل نوع، إضافةً إلى الرقم الدولي، وتاريخ التصنيع، وتاريخ التخزين، وعنوان ورقم الهاتف للجهة الموردة، إذ يجب أن يتم السحب منها حسب الأقدم صناعةً وتخزيناً فالأحدث.
واشترطت أن تكون المخازن مبنية من مواد غير قابلة للاحتراق والتمدد والتقلص، وعلى ارتفاع لا يقل عن متر واحد عن مستوى سطح الأرض، بمساحات كافية للتهوية والخطر، ومراعاة الشروط والمواصفات الوقائية الخاصة بكل نوع منها، وتزويد المخزن بمخارج للطوارئ لا تقل عن مخرجين متباعدين، ومسارات آمنة لسيارات الإسعاف والإطفاء بحيث لا يقل عرض المسار عن 6 أمتار من الساحة المخصصة لذلك، وأن تخزن المواد بشكل مناسب بحيث يسهل التعامل معها في حالة حدوث خطر أو الحوادث.
ومن المتطلبات الكهربائية تحديد نوع المادة الكيميائية حسب المواصفات والمقاييس السعودية، وإعطاء كل نوع من المواد بطاقة تعريفية متخصصة، وتخزين المواد القابلة للانفجار في أماكن معزولة ومخصصة، بعيدة عن مناطق التخزين الأخرى، وتخزين المواد السائلة بعيداً عن المواد الصلبة، مع وجود وسائل مناسبة للاحتواء في حال التسرب، وتقطيع عبوات المواد الكيميائية الكبيرة إلى عبوات صغيرة للتعامل معها بسهولة، وأن تكون مصادر الإضاءة في المستودع محمية ولا يصدر عنها شرر، وأن تكون مطابقة لأنظمة السلامة (المواصفات الدولية المعتمدة).
وأكّدت اللائحة أيضاً ضرورة الالتزام بتعليمات الشركات المصنعة، خصوصاً فيما يتعلق بصفة المادة والمخاطر الناتجة عنها وعددها وطرق استخدامها وطرق تخزينها، والاطلاع على بطاقة السلامة الكيميائية عند التعرض لهذه المواد وفقاً لما يرد من الشركة المصدرة لبطاقة السلامة الكيميائية، وأن تخزن المواد الكيميائية بحيث تكون بعيدة عن أشعة الشمس المباشرة أو سقوطها أو ملامستها لمياه الأمطار أو المياه الجوفية، وأن تكون أوعية التخزين محكمة الغلق وخالية من العيوب والكسور أو الصدأ ومصنوعة من مواد مناسبة.
المواد شديدة الاشتعال في عبوات مناسبة
يجب مراعاة الفصل عند التخزين بين المواد المتوافقة وغير المتوافقة، وأن توضع المواد السامة أو المواد الكيميائية شديدة الاشتعال في عبوات مناسبة لا تتأثر بفعل المادة التي تحتويها، وفصل المواد التي لها مخاطر حرارية عالية عن باقي المواد الأخرى بجدار عازل مقاوم للحرارة له طاقة عزل كافية من المواد العازلة والمانعة للاشتعال، والفصل التام بين المواد القابلة للاشتعال لتجنب الخطورة عند اتصالها ببعضها أو بمواد أخرى في حال حدوث تسرب، إذ يُمنع تخزين السوائل شديدة الاشتعال مع المواد المؤكسدة، ويجب الالتزام بعدم تعبئة المواد الكيميائية الخطرة بعبوات من البلاستيك الاستهلاكي والرديء الجودة، والالتزام بعدم تخزينها لفترة طويلة، وعدم تخزين المواد التي قد تنتج خطورة إضافية نتيجة لتفاعلها بأمان، إلا إذا كانت معبأة بعبوات مصنوعة خصيصاً لتحمل مثل المخاطر.
ويُمنع منعاً باتاً خلط المواد الكيميائية أو نقلها أو تعبئتها في أوعية أخرى إلا باستخدام عبوات مناسبة وأدوات مخصصة، وإعادة التعبئة في عبوات سبق استخدامها مرة واحدة، كما يجب وضع بطاقة تعريفية تبين اسم المادة الكيميائية واسم الشركة المصنعة وتاريخ الإنتاج وتاريخ الانتهاء، مع تخزينها بعيداً عن أماكن تصنيع الأغذية والأدوية والمشروبات، ووضعها داخل أوعية محكمة الإغلاق، محمية من الكسر أو التلف، وتوضع داخل حاويات ثانوية (Secondary Containment) لمنع تسربها خارجها، وتوفير أوعية مناسبة لتجميع المواد المنسكبة، على أن تكون الأوعية المستخدمة في نقل المواد الكيميائية مزودة ببطاقات تعريفية توضح محتواها، على أن يكون موقع التخزين بعيداً عن مناطق التجمعات السكنية أو المدارس أو المستشفيات أو الأسواق، ويكون ذلك في مكان خاص مستقل خارج المدن.
English
الدفاع المدني: تخزين المواد الكيميائية بعيداً عن المساكن والمدارس والمستشفيات
30 أغسطس 2025 - 16:38
|
آخر تحديث 30 أغسطس 2025 - 16:38
إبراهيم العلوي (جدة) @i_waleeed22
The Civil Defense has revealed the main conditions and instructions for storing chemical materials, the safety requirements for storage sites, site selection criteria, and the construction, electrical, and environmental requirements. It emphasized that hazardous chemical storage should be in a building separate from other buildings, in a location that does not expose the storage to danger, away from residential and important areas, and populated places, and at a safe distance from vital facilities according to the requirements of the relevant authorities. The storage should be a single-story building only, equipped with fire resistance and extinguishing means with independent sources, with hazardous materials stored in well-sealed containers and properly packaged, labeled with all essential information, and sufficient lighting and natural illumination for no less than 6 hours a day.
The Civil Defense stressed the importance of not placing stored materials in corridors, ensuring storage is on a level ground free of moisture, and that materials expected to be damaged due to contact with water are elevated on supports at least 10 cm off the ground. Containers should be placed on suitable metal shelves according to size and type, leaving a distance of at least 150 cm between each stack, and at least 100 cm between the wall and the stored materials. The chemical name should be labeled on each type, along with the international number, manufacturing date, storage date, and the address and phone number of the supplier, with the oldest in manufacturing and storage being withdrawn first.
It is required that the warehouses be built from non-combustible, non-expandable, and non-contractile materials, elevated at least one meter above ground level, with sufficient space for ventilation and hazard considerations, adhering to the specific preventive conditions and specifications for each type. The warehouse should be equipped with at least two separated emergency exits and safe pathways for ambulances and firefighting vehicles, with a pathway width of no less than 6 meters from the designated area, and materials should be stored appropriately to facilitate handling in case of danger or accidents.
Among the electrical requirements is the specification of the chemical material according to Saudi standards, providing each type of material with a specialized identification card, storing explosive materials in isolated and designated areas, away from other storage areas, and keeping liquid materials away from solid materials, with suitable containment measures in case of leakage. Large chemical containers should be cut into smaller containers for easier handling, and the lighting sources in the warehouse should be protected and not produce sparks, complying with safety regulations (approved international specifications).
The regulation also emphasized the necessity of adhering to the manufacturer's instructions, especially regarding the nature of the material, the risks associated with it, their number, methods of use, and storage methods, and to consult the safety data sheet when exposed to these materials according to what is provided by the issuing company of the safety data sheet. Chemical materials should be stored away from direct sunlight, falling rain, or contact with groundwater, and storage containers should be tightly sealed and free from defects, cracks, or rust, and made of suitable materials.
Highly flammable materials in suitable containers
It is essential to separate compatible and incompatible materials during storage, and to place toxic or highly flammable chemicals in suitable containers that are not affected by the material they contain. Materials with high thermal risks should be separated from other materials by a heat-resistant insulating wall with sufficient insulation capacity from non-combustible insulating materials, and there should be complete separation between flammable materials to avoid danger when they come into contact with each other or with other materials in case of leakage. The storage of highly flammable liquids with oxidizing materials is prohibited, and it is essential to avoid packing hazardous chemicals in consumer-grade and low-quality plastic containers, to refrain from storing them for long periods, and not to store materials that may pose additional risks due to their reactions unless they are packed in containers specifically designed to withstand such risks.
Mixing, transferring, or repacking chemicals into other containers is strictly prohibited unless using suitable containers and specialized tools, and repacking in containers that have been previously used once is also prohibited. An identification card should be placed indicating the chemical name, manufacturer name, production date, and expiration date, with storage away from food, medicine, and beverage manufacturing areas, kept in tightly sealed containers, protected from breakage or damage, and placed inside secondary containment to prevent leakage. Suitable containers should be provided for collecting spilled materials, and containers used for transporting chemicals should be labeled to indicate their contents, with the storage site being far from residential areas, schools, hospitals, or markets, ideally located in a dedicated area outside cities.
The Civil Defense stressed the importance of not placing stored materials in corridors, ensuring storage is on a level ground free of moisture, and that materials expected to be damaged due to contact with water are elevated on supports at least 10 cm off the ground. Containers should be placed on suitable metal shelves according to size and type, leaving a distance of at least 150 cm between each stack, and at least 100 cm between the wall and the stored materials. The chemical name should be labeled on each type, along with the international number, manufacturing date, storage date, and the address and phone number of the supplier, with the oldest in manufacturing and storage being withdrawn first.
It is required that the warehouses be built from non-combustible, non-expandable, and non-contractile materials, elevated at least one meter above ground level, with sufficient space for ventilation and hazard considerations, adhering to the specific preventive conditions and specifications for each type. The warehouse should be equipped with at least two separated emergency exits and safe pathways for ambulances and firefighting vehicles, with a pathway width of no less than 6 meters from the designated area, and materials should be stored appropriately to facilitate handling in case of danger or accidents.
Among the electrical requirements is the specification of the chemical material according to Saudi standards, providing each type of material with a specialized identification card, storing explosive materials in isolated and designated areas, away from other storage areas, and keeping liquid materials away from solid materials, with suitable containment measures in case of leakage. Large chemical containers should be cut into smaller containers for easier handling, and the lighting sources in the warehouse should be protected and not produce sparks, complying with safety regulations (approved international specifications).
The regulation also emphasized the necessity of adhering to the manufacturer's instructions, especially regarding the nature of the material, the risks associated with it, their number, methods of use, and storage methods, and to consult the safety data sheet when exposed to these materials according to what is provided by the issuing company of the safety data sheet. Chemical materials should be stored away from direct sunlight, falling rain, or contact with groundwater, and storage containers should be tightly sealed and free from defects, cracks, or rust, and made of suitable materials.
Highly flammable materials in suitable containers
It is essential to separate compatible and incompatible materials during storage, and to place toxic or highly flammable chemicals in suitable containers that are not affected by the material they contain. Materials with high thermal risks should be separated from other materials by a heat-resistant insulating wall with sufficient insulation capacity from non-combustible insulating materials, and there should be complete separation between flammable materials to avoid danger when they come into contact with each other or with other materials in case of leakage. The storage of highly flammable liquids with oxidizing materials is prohibited, and it is essential to avoid packing hazardous chemicals in consumer-grade and low-quality plastic containers, to refrain from storing them for long periods, and not to store materials that may pose additional risks due to their reactions unless they are packed in containers specifically designed to withstand such risks.
Mixing, transferring, or repacking chemicals into other containers is strictly prohibited unless using suitable containers and specialized tools, and repacking in containers that have been previously used once is also prohibited. An identification card should be placed indicating the chemical name, manufacturer name, production date, and expiration date, with storage away from food, medicine, and beverage manufacturing areas, kept in tightly sealed containers, protected from breakage or damage, and placed inside secondary containment to prevent leakage. Suitable containers should be provided for collecting spilled materials, and containers used for transporting chemicals should be labeled to indicate their contents, with the storage site being far from residential areas, schools, hospitals, or markets, ideally located in a dedicated area outside cities.
